Synthesis and performance of TiB2–B4C composites by high pressure of TiC–B mixture

TiB₂–B₄C composites were in situ synthesized and consolidated by high pressure synthesis method from a mixture of TiC and B powders at the pressure and temperature of 5.0 GPa and 1500℃-1900℃. The phase composition, microstructure, density, hardness, thermal conductivity, and electrical resistivity of TiB₂–B₄C composites were analyzed. As the increase in the synthesis temperature, the products were TiB₂ and B₄C phases and that crystallinity improved. TiB₂–B₄C composites were dense without obvious pores. TiB₂–B₄C composites synthesized at 1800℃ obtained the optimized performance, including the relative density of 98.2%, the Vickers hardness of 31.7 ± 1.2 GPa with the load of 9.8 N, the thermal conductivity of 30.3 ± 0.7 W/(m K), and the electrical resistivity of 3.3 × 10⁻³ Ω cm, respectively. The grain size of the TiB₂–B₄C composites changed with the increase in synthesis temperature, leading to the changes in hardness, thermal conductivity, and electrical resistivity.     

工程水压爆破在煤层爆破中的应用

通过黑岱沟露天煤矿的工程试验总结了工程水压爆破技术(水土复合填塞炮孔)的原理及在露天煤矿爆破施工中的应用效果。在露天煤矿爆破施工中采用工程水压爆破技术,可以提高煤层爆破的大块率,降低单位立方岩石耗药量,降低爆破气体的温度,同时可以降低煤层爆破失火率、粉尘排放量,有效地控制爆破飞石。     

Simplified partitioning model to simulate high pressure under-expanded jet flows impinging vertical obstacles

Various reduced-order models have been developed to quickly model high pressure underexpanded jets. One example is the two-layer partitioning model which was developed to model underexpanded jets, but it has not been evaluated for high pressure jets with obstacles in the jet flow region. This research describes an improved two-layer partitioning model based on the Abel-Noble equation of state that is applied here to model horizontal jet flows impacting a vertical obstacle with validations against high pressure gas experiments, full CFD simulations and a revised notional nozzle model based on the Abel-Noble equation of state. The improved two-layer partitioning model accurately predicts the gas concentrations on the obstacle for a 15 MPa underexpanded jet while consuming much less computational resources and time compared with the full CFD simulation.     

Synthesis of highly efficient,structurally improved Li4SiO4 sorbents for high-temperature CO2 capture

Li₄SiO₄ sorbents for high-temperature CO₂ removal have drawn extensive attention owing to their potential application in carbon capture and storage (CCS). The major challenge in the application lies in the poor CO₂ capture performance under realistic conditions of low CO₂ concentrations, owing to the dense structure and poor porosity. In this work, Li₄SiO₄ sorbents were prepared with porous micromorphologies and large contact areas using a variety of organometallic Li-precursors, achieving fast CO₂ sorption kinetics, high capacity and excellent cyclic stability at a low CO₂ concentration (15?vol%). It was found that a high conversion of ~?74% was maintained for pure Li₄SiO₄ even after 100 sorption/desorption cycles. Moreover, by doping with Na₂CO₃ to reduce the CO₂ diffusion resistance, the conversion of the sorbent was further enhanced to 93.2%. The enhancement mechanism of alkali carbonate have been proven here to be ascribed to the formation of the eutectic melt of Li/Na carbonates, the existence and function of which has been confirmed in this study.     

高泉背斜地层压力测井多参数综合解释与异常高压成因

目前国内外地层压力测井解释方法较多,但大多数方法基于欠压实沉积理论并局限于单一的地层岩性,尤其是针对盆地边缘山前深层构造,单一测井参数确定地层压力误差较大,且无法解释沉积压实机制以外的异常高压。为此,将多种异常高压机制相关的测井参数进行综合解释,建立适合山前复杂构造的地层压力测井多参数计算模型,评价准噶尔盆地南缘高泉背斜高探1井的地层压力剖面,其计算结果与钻井实测数据吻合,相对误差小于3.00%.同时,基于原始沉积加载—卸载过程力学原理,利用地层压力测井多参数分析判别出高泉背斜深层各层系异常高压的形成机制。     

Numerical Simulation on Design of Temperature Control for Side Heater in Directional Solidification System of Multi-Crystalline Silicon

In this paper, the transient numerical simulation was used to study the effects of temperature variation in three ways (the open downward parabola, the str